T-GPS User Manual Version 1.2 | 35
7.
Settings
7.1
Initialisation
After powering-on, the time displayed on the LED is the unsynchronised time. The PPS Indicator
and Lost Synchronisation Indicator will blink, which indicates that the T-GPS3000A is initialising.
After about 90 seconds, the initialisation will finish and the equipment will display the local time
via the LED, and the Lost Synchronisation Indicator will no longer blink.
7.2
Front Panel Settings
There are four buttons on the front panel,
‘
ITEM
’
,
‘
‘
,
‘
+
’
,
‘
ENTER
’ which control the
settings of
the T-GPS3000 Figure 7.1.
Figure 7.1 T-GPS Control Panel
7.2.1
Brightness Adjustment
The third LED segment
from the left is the Brightness Indicator, ‘0’ is the minimum and ‘F’ is the
maximum brightness. When the T-
GPS3000 is in working mode, pressing ‘
‘and ‘+’ will adjust
the brightness of the LED.
7.2.2
Date View
In running mode, press ‘ENTER’ and the current date is displayed.
