T-GPS User Manual Version 1.2 | 38
7.3.6
Setting the Daylight Saving Time End Date
Menu option 11: The fourth digit from the left represents the tens of the number of the month
when DST finishes; Press
to enter and press
‘+’
to set it as 0 or 1; the fifth digit from the left is
the units; press
to enter and press
‘+’
to set it from 0 to 9. The seventh digit from the left is the
week when DST finishes; press
to enter and press
‘+’
to set it from 1 to 5. The eighth digit from
the left is the day of the week in which DST finishes; Press
to enter and press
‘+’
to set it from
0 to 6, where 0 represents Sunday and 1 to 6 represent Monday to Saturday respectively. After all
are set, press
‘
ENTER
’
to save the setting.
For example,
•
LED displays 1 1 □ 1 0 ≡ 3 0, the DST ends on Sunday, the third week of Octob
er.
•
LED displays 1 1 □ 0 9 ≡ 1 1, the DST ends on Monday, the first week of September.
7.3.7
Setting the Daylight Saving Time End Time
Menu option 12: The fourth digit from the left is the tens of the hour at which DST ends; press
to enter and press
‘+’
to set it from 0 to 2.; the fifth digit from the left is the units; press
to
enter and press
‘+’
to set it from 0 to 9. The seventh digit from the left is tens of the minute at
which DST ends; press
to enter and press
‘+’
to set it from 0 to 5. The eighth digit from the left
is the units; press
to enter and press
‘+’
to set it from 0 to 9. After all are set, press
‘
ENTER
’
to
save the setting.
For example;
•
LED displays 1 1 □ 1 1
＝
5 9, the DST ends at 11:59.
•
LED displays 1 1
□ 2 3
＝
3 0, the DST ends at 23:30.
7.3.8
Setting the Delay for the GPS Lost Alarm
Menu option 13: The fourth digit from the left is the tens of the number of hours the alarm is
delayed; press
to enter and press
‘+’
to set it from 0 to 2.; the fifth digit from the left is the
units; press
to enter and press
‘+’
to set it from 0 to 9. The seventh digit from the left is the
tens of the minutes, press
to enter and press
‘+’
to set it from 0 to 5. The eighth digit from left
is the units; press
to enter and press
‘+’
to set it from 0 to 9. After all are set, press
‘
ENTER
’
to
save the setting.
For example;
•
LED displays 1 3 □ 0 0 □ 0 0, it alarms immediately once the GPS is lost.
•
LED displays 1 3 □ 0 1 □ 3 0, it alar
ms after one and a half hours if the GPS is lost.
