background image

1021 

|

 1022 SMALL AIR COMPRESSOR

02

02 — 

GENERAL INFORMATION

02_

INTRODUCTION

02_

RECORD YOUR SERIAL NUMBER

02_

REGISTER YOUR PURCHASE

03 — 

IMPORTANT SAFETY 

INFORMATION

03_

SAFETY & SERIAL NUMBER LABELS

04 — 

EQUIPMENT SPECIFICATIONS

05 — 

SETUP

05_

PRODUCT OVERVIEW

05_

PRE-OPERATION CHECKLIST

06_

ASSEMBLY

06_

TEST RUN

07 — 

DAILY OPERATION

07 — 

CARE AND MAINTENANCE

08 — 

TROUBLESHOOTING

10 — 

REGULATORY AND 

COMPLIANCE NOTICES

10 — 

WARRANTY STATEMENT

Congratulations on the purchase of your new Keiser Small 
Air Compressor and welcome to the Keiser family. For your 
safety, and to ensure optimal equipment performance, 
please read and understand this manual before use of the 
air compressor. 

If you have any questions regarding assembly or operation 
after reading this manual, our Keiser Customer Support 
team will be happy to assist by telephone at 1 559 256 8000 
or via live chat at keiser.com/support (Monday—Friday, 9 am 

to 5 pm Pacific Time), or by email at service@keiser.com.

Yours in Health,
Keiser Corporation

Please take a moment at this time to record the serial 

number (“Serial No.”) in the space provided below. 

Serial No.: 

INTRODUCTION

RECORD YOUR SERIAL NUMBER

GENERAL INFORMATION

CONTENTS

Register your product to stay informed of safety notifications 

and for faster, more accurate warranty service

.

Scan the QR Code below to access the interactive online 
warranty registration.

https://www.keiser.com/forms/warrantyregistration

REGISTER YOUR PURCHASE

SCAN

Serial Number Location

NOTICE: Figures and illustrations in this Operation Manual 
are provided for reference only and may differ from the 

actual product appearance. Product design and specification 

may change without notice.

Keiser, the Keiser logo, and other trademarks associated with Keiser products referred to in this publication are trademarks of Keiser Corporation. 

© Copyright 2021, Keiser Corporation. All rights reserved.
Distribution and copying of this document, use and communication of its contents is not permitted without written authorization from Keiser Corporation. The content 

of this document is furnished for informational use only, may be subject to change without notice, and should not be construed as a commitment by Keiser Corporation. 

Every effort has been made to ensure that the information in this manual is accurate. Keiser Corporation is not responsible for printing or clerical errors.

Summary of Contents for 1021













Reviews: