Service Department (800) 888-7009
2
Step One: Mount Main Frame on Base Frame
Tools required: four bolts, eight washers, and four acorn nuts, torque wrench, 5/8” wrench, 5/8”
socket
Place the four washers on the bolts, and place the bolts in the holes on the base frame.
Put a stack of cardboard between the bolts and the floor. This will protect the floor,
while preventing the bolts from backing out as you place the main frame on the base
frame.
Peel the top layer off of the adhesive strip on the base frame. Use the bolts to guide the
main frame into the correct position onto the adhesive.
Note:
failure to correctly align
the main frame on the adhesive may result in the tearing of the adhesive while trying to
correctly reposition the main frame.
Step One
Step One
Step Two
Step Three
Step Four
Step Five
Adhesive strip
