Maintenance
The walking belt is off-center
1.
If the walking belt has shifted to the right, first remove the key and
UNPLUG THE POWER CORD. Using the Allen wrench, turn the left front
roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4
of a turn each. Be careful not to over tighten the walking belt. Plug in the
power cord, insert the key and run the TrekMill for a few minutes. Repeat
until the walking belt is centered.
2.
If the walking belt has shifted to the left, first remove the key and
UNPLUG THE POWER CORD. Using the Allen wrench, turn the left front
roller adjustment bolt counterclockwise, and the right bolt clockwise, 1/4
of a turn each. Be careful not to over tighten the walking belt. Plug in the
power cord, insert the key and run the TrekMill for a minutes. Repeat until
the walking belt is centered.
The walking belt slips when walked on
If the walking belt slips when walked on, first remove the k ey and
UNPLUG THE POWER CORD. Using the Allen wrench, turn both roller
adjustment bolts clockwise, 1/4 of a turn. When the walking belt is
correctly tightened, you should be able to lift each side of the walking belt
2 to 2.75 in. (5-7cm) off the walking platform. Be careful to keep the
walking belt centered. Plug in the power cord, insert the key and carefully
walk on the TrekMill for a few minutes. Repeat until the walking belt is
properly tightened.
12