background image

Limited Warranty

1.

 

Keiser warrants this product to be free from defects in workmanship and material, under normal use and 

service conditions, for a period of one year from the date of purchase (Running Belt and Motor Belt for six 
months from the date of purchase). This warranty extends only to the original purchaser. Keiser's obligation 
under this warranty is limited to replacing or repairing, at Keiser's option, the product at one of its authorized 
service centers. All products for which warranty claim is made must be received by Keiser at one of its 
authorized service centers with all freight and other transportation charges prepaid, accompanied by sufficient 
proof of purchase. All returns must be pre-authorized by Keiser. This warranty does not extend to any product or 
damage to a product caused by or attributable to freight damages, abuse, misuse, improper or abnormal usage 
or repairs not provided by an Keiser authorized service center, to products used for commercial or rental 
purposes, or to products used as store display models. No other warranty beyond that specifically set forth 
above is authorized by Keiser.

2.

 

Keiser is not responsible or liable for indirect, special or consequential damages arising out of or in 

connection with the use or performance of the product or damages with respect to any economic loss, loss of 
property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other 
consequential damages of any nature.

3.

 

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of 

merchantability or fitness for a particular purpose and is limited in its scope and duration to the terms set forth 
herein. 

Product Name

Model Name

Serial No. 

Warranty Period

Purchase Date 

TrekMill

1 year from purchase

(6 months for Running Belt and Motor Belt) 

13

Summary of Contents for TrekMill MM5050















Reviews: