Section 2: General operation
Model 2461 Interactive SourceMeter® Instrument Reference Manual
2-138
2461-901-01 A/November 2015
Save a user setup to a USB flash drive
From the front panel:
1. Save the user setup to internal memory, as described in
Save a user setup to internal memory
(on page 2-137).
2. Insert the USB flash drive into the USB port on the front panel.
3. Press the
MENU
key.
4. Under Scripts, select
Manage
. The MANAGE SCRIPTS window is displayed.
5. In the Internal Scripts list, select the script you want to copy to the USB flash drive.
6. Select
>
. The file is transferred to the USB flash drive, and the corresponding filename is
displayed in the USB Scripts box.
Using TSP commands:
1. Save the user setup to internal memory, as described in
Save a user setup to internal memory
(on page 2-137).
2. Insert the USB flash drive into the USB port on the front panel.
3. Send the command:
setupName
.save("/usb1/
USBSetupName
")
Where
setupName
is the name of the user setup and
USBSetupName
is the name of the file on
the USB flash drive. You can use the same name for
setupName
and
USBSetupName
.
Copy a user setup
To copy a user setup from an external USB flash drive to the instrument from the front panel:
1. Insert the USB flash drive into the USB port on the front panel.
2. Press the
MENU
key.
3. Under Scripts, select
Manage
. The MANAGE SCRIPTS window is displayed.
4. In the USB Scripts list, select the script you want to copy from the USB flash drive.
5. Select
<
. The file is transferred to the USB flash drive, and the corresponding filename is
displayed in the Internal Scripts box.
