Model 2461 Interactive SourceMeter® Instrument Reference Manual
Section 8: TSP command reference
2461-901-01 A/November 2015
8-123
smu.digitize.math.percent
This attribute specifies the reference constant that is used when math operations are set to percent.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Restore configuration
Instrument reset
Power cycle
Measure configuration list
Configuration script
Measure configuration list
1
Usage
value
= smu.digitize.math.percent
smu.digitize.math.percent =
value
value
The reference used when the math operation is set to percent; the range is -1e12 to
+1e12
Details
The percent math function displays measurements as percent deviation from a specified reference
constant. The percent calculation is:
Where:
•
Percent
is the result
•
Input
is the measurement (if relative offset is being used, this is the relative offset value)
•
Reference
is the user-specified constant
Example
smu.digitize.func = smu.FUNC_DIGITIZE_CURRENT
smu.digitize.math.format = smu.MATH_PERCENT
smu.digitize.math.percent = 42
smu.digitize.math.enable = smu.ON
Set the measurement function to digitize
current.
Set the math operations to percent.
Set the percentage value to 42.
Enable math operations.
Also see
Calculations that you can apply to measurements
(on page 3-82)
(on page 8-119)
(on page 8-120)
