13-16
Return to
2600AS-901-01 Rev. B / September 2008
Section 13: Test Script Builder (TSB)
Series 2600A System SourceMeter® Instruments Reference Manual
Figure 13-13
Importing a script from memory of the Series 2600A
Instrument console
With communications established with the SourceMeter instrument, the Instrument Console is
used for the following operations:
•
Execute chunks, which are individual ICL commands and TSL programming statements.
•
Display returned data (readings and messages).
•
Display error messages caused by erroneous code sent from the Instrument Console.
The instrument console is opened by clicking the Instrument Console tab in the lower window
pane of the Test Script Builder (see
).
A) Click File to display the drop-down file menu
and click Import to open the Import wizard.
B) In the Import Select box, click Existing Project
From Instrument and then click Next.
C) In the Import Project From Instrument box, click
the KIGeneral_Script project, and then click Finish.
