1-4
Return to
2600AS-901-01 Rev. B / September 2008
Section 1: Getting Started
Series 2600A System SourceMeter® Instruments Reference Manual
•
Certificate of calibration
•
Quick Start Guide
•
CD-ROMs that contain:
•
PDFs of the User’s and Reference Manuals
•
Test Script Builder script development software
•
Accessories as ordered
The following items are included with Models 2601A, 2602A, 2611A, and 2612A only:
•
2600-KIT Screw terminal connector kit (two with Models 2602A and 2612A and one with
Models 2601A and 2611A)
The following items are included with Models 2635A and 2636A only:
•
2600-IAC interlock connector
•
CS-1423-3 inverted mini plug
•
2636-002 wire cutting
•
2600-ALG-2 low noise triax cable with alligator clips, UL approved for up to 42 V, 2m (6.6 ft)
(two with Model 2636A and one with Model 2635A)
•
Quick Start Guide
Options and accessories
GPIB cables, interfaces, and adaptors (connects Series 2600A to the GPIB bus)
Models 7006-1 and 7006-2:
Single-shielded GPIB cables. Terminated with one straight
connector (non-stacking) and one feed-through connector. Model 7006-1 is 1m long; Model
7006-2 is 2m long.
KPCI-488LP:
IEEE-488 interface/controller for the PCI Bus.
KPXI-488:
IEEE-488 interface board for the PXI Bus.
KUSB-488A:
USB-to-GPIB interface adapter.
Models 7007-05, 7007-1, 7007-2, and 7007-4:
Double-shielded premium GPIB cables. Each
end is terminated with a feed-through metal housing for longest life and best performance.
Model 7007-05 is 0.5m long; 7007-1 is 1m long; Model 7007-2 is 2m long; Model 7007-4 is 4m
long.
Model 7010:
Shielded GPIB-to-GPIB bus adapter. Provides additional clearance between the
rear panel and GPIB cable connector. Allows easier access to cables and other connectors.
RS-232 cable (connects Series 2600A to the RS-232)
Model 7009-5 shielded RS-232 cable:
This straight-through cable connects the RS-232 of
the Series 2600A to the RS-232 interface of your PC. This cable is 5 ft long and uses shielded
cable and connectors to reduce electromagnetic interference (EMI).
