Model 2651A High Power System SourceMeter® Instrument User's Manual
Section 3: Using the web interface
Reading buffers
The Reading Buffers tab provides access to the Model 2651A reading buffers. The data used in this
example was created and placed in the buffer by the
Exercise: Create and run a script with TSB
(on page 3-4).
Exercise: Retrieve readings from a buffer
To retrieve readings from a populated buffer:
1. From the navigation area on the left side of the web interface, select
Reading Buffers
. The
Reading Buffers embedded page is displayed.
Figure 6: Select reading buffer
2. Select
smua.nvbuffer1
(1).
3. In the Recall Attributes area (near the bottom of the page), select
Values and Time Stamp
(2).
4. Click
Download
(3). The table displays the present buffer data.
2651A-900-01 Rev. A / March 2011
3-7
