Model 2651A High Power System SourceMeter® Instrument Reference Manual
Section 7: Command reference
2651A-901-01 Rev. A / March 2011
7-293
Details
These attributes are used to read or write to the operation status measuring summary registers. Reading a status
register returns a value. The binary equivalent of the returned value indicates which register bits are set. The
least significant bit of the binary number is Bit B0, and the most significant bit is Bit B15.
For information about .condition, .enable, .event, .ntr, and .ptr registers, refer to
(on page E-
Enable and transition registers
(on page E-18). The individual bits of this register have the following
meanings:
Bit Value
Description
B0
Not used
Not applicable.
B1
status.operation.measuring.SMUA
Bit will be set when taking an overlapped
measurement, but it will not set when taking a
normal synchronous measurement.
Bit B1 decimal value: 2
Binary value: 0000 0010
B2-B15
Not used
Not applicable.
In addition to the above constant,
operationRegister
can be set to the decimal equivalent of the bit to set.
Example
status.operation.measuring.enable =
status.operation.measuring.SMUA
Sets the SMUA bit of the operation
status measuring summary enable
register using a constant.
Also see
status.operation.remote.*
This attribute contains the operation status remote summary register set.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute
- -
- -
- -
- -
.condition (R)
Yes
Not applicable
Not saved
Not applicable
.enable (RW)
Yes
Status reset
Not saved
0
.event (R)
Yes
Status reset
Not saved
0
.ntr (RW)
Yes
Status reset
Not saved
0
.ptr (RW)
Yes
Status reset
Not saved
2050 (All bits set)
