Model 2657A High Power System SourceMeter® Instrument Reference Manual
Appendix C: LAN concepts and settings
2657A-901-01 Rev. B/December 2012
C-11
Setting the IP address
Contact your corporate information technology (IT) department to secure a valid IP address for the
instrument when placing the instrument on a corporate network.
To set the IP address (when LAN configuration method is set to MANUAL):
1. From the front panel, press the
MENU
key, and then select
LAN > CONFIG > IP-ADDRESS
.
2. Turn the navigation wheel
to select and enter a valid IP address for the instrument.
3. Press
the
ENTER
key to confirm the changes.
4. Press
the
EXIT (LOCAL)
key once to return to the LAN CONFIG menu.
5. Select
APPLY_SETTINGS > YES
, and then press the
ENTER
key.
Setting the gateway
Contact your corporate information technology (IT) department to secure a valid gateway for the
instrument when placing the instrument on a corporate network.
To set the gateway (when LAN configuration method is set to MANUAL):
1. From the front panel, press the
MENU
key, and then select
LAN > CONFIG > GATEWAY
.
2. Turn the navigation wheel
to select and enter a valid gateway address for the instrument.
3. Press
the
ENTER
key to confirm the changes.
4. Press
the
EXIT (LOCAL)
key once to return to the LAN CONFIG menu.
5. Select
APPLY_SETTINGS > YES
, and then press the
ENTER
key.
Setting the subnet mask
Contact your corporate information technology (IT) department to secure a valid subnet mask for the
instrument when placing the instrument on a corporate network.
To set the subnet mask (when LAN configuration method is set to MANUAL):
1. From the front panel, press the
MENU
key, and then select
LAN > CONFIG > SUBNETMASK
.
2. Turn the navigation wheel
to select and enter a valid subnet mask for the instrument.
3. Press
the
ENTER
key to confirm the changes.
4. Press
the
EXIT (LOCAL)
key once to return to the LAN CONFIG menu.
5. Select
APPLY_SETTINGS > YES
, and then press the
ENTER
key.
NOTE
NOTE
NOTE
Summary of Contents for 2657A
Page 3: ......
