Model 2701 User’s Manual
Range, Digits, Rate, Bandwidth, and Filter
4-5
Manual ranging
The range is selected by specifying the expected reading as an absolute value using the
<n> parameter for the appropriate :RANGe command. The Model 2701 will then go to the
most sensitive range for that expected reading. For example, if you expect a reading of
approximately 3V, let the parameter (<n>) equal 3 to select the 10V range.
Auto ranging
The :RANGe:AUTO command is coupled to the command to select range manually
(:RANGe <n>). When auto range is enabled, the parameter value for :RANGe <n>
changes to the automatically selected range value. When auto range is disabled, the
instrument remains at the selected range. When a valid :RANGe <n> command is sent,
auto ranging disables.
Range programming examples
NOTE
The following examples can be run from the KE2700 Instrument Driver using
the example named “MultiRange” in Table G-1 of Appendix G.
Example #1 — The following commands select range for DCV,
Ω
2, and DCI:
VOLT:RANG 0.5
' Select 1V range for DCV.
RES:RANG 2e3
' Select 10k
Ω
range for
Ω
2.
CURR:RANG 0.1
' Select 100mA range for DCI.
Example #2 — The following command sequence configures channel 101 of the
Model 7700 to select the 10VDC range when it is scanned.
FUNC 'VOLT',(@101)
' Set 101 for DCV function.
VOLT:RANG 1.5,(@101)
' Set 101 for 10V range.
2701-900-01.book Page 5 Wednesday, August 3, 2011 9:43 AM
Summary of Contents for 2701
