Remote programming 7-26
Remote programming example 7-32
Reset 7-13
Resume scan after power-up 7-21
Sequential and non-sequential 7-3
Simple 1-35, 7-13
see FORMat commands, SCPI
reference tables, SCPI signal oriented
measurement commands, and SYSTem
commands
SCPI reference tables 15-1, 15-2
CALCulate commmand summary 15-3
DISPlay command summary 15-5
FORMat command summary 15-6
ROUTe command summary 15-6
SENSe command summary 15-8
STATus command summary 15-19
SYSTem command summary 10-6,
TRACe command summary 15-25
Trigger command summary 15-26
UNIT command summary 15-27
SCPI signal oriented measurement commands
13-1
CONFigure:<function> [<rang>], [<res>],
[<clist>] 13-4
Settings
Setups 1-21
Commands 1-26
Remote programming 1-26
Restoring 1-22
Saving 7-21
Saving (power-on) 1-22
Saving (user) 1-21
Shielding 3-15, 3-22, E-9
Signal handshaking 10-29
Signal processing
Buffer D-5
Filter D-4
Limits D-5
Math D-5
OComp D-4
Output trigger pulse (VMC) D-4
Ratio and Ch Average D-6
Rel D-5
Signal processing sequence D-2
Slot numbering 2-6
Software 1-5
Source mode
Logic control 9-10
Specifications A-1
Speed
Setting measurement speed 4-10
vs. noise characteristics 4-8
Standard deviation buffer statistic 6-8
Standard event status 11-11
Status and error messages C-1
Status byte and service request (SRQ) 11-8
Commands 11-10
Status indicators
Ethernet 10-20
Status structure 11-1
Overview 11-2
Operation overview 7-7
Cables and connector kits 1-4
CARD commands 2-33
Closing and opening channels 1-31, 2-1
Connections 2-4, 2-5
Dual multiplexers 2-24
Identifying installed 1-7, 2-30
Installation 2-4
Model 7700 2-36
Queries 2-32
Viewing closed channels 2-30
System channel
Control commands 2-12
Controlling 2-10
Operation 1-31, 2-7
SYSTem commands 14-4
Summary 10-6, 10-15, 10-31, 15-20
SYSTem:BEEPer[:STATe] <b> 14-5
SYSTem:KEY <NRf> 14-4
SYSTem:PRESet 14-4
SYSTem:VERSion 14-4
T
Temperature
Best temperature sensor 3-33
Equations F-1
Measurements
see Temperature measure-
ments
Temperature measurements 3-33
4-wire RTDs 3-37
Configuration 3-42
Connections 3-38
Procedure 3-45
Thermistors 3-36
Thermocouples 3-33
Terminator 10-30
Test leads and connector adapter 1-4
Tests
see Continuity testing
2701-900-01.book Page 8 Wednesday, August 3, 2011 9:43 AM
Summary of Contents for 2701
