1
Getting Started
Quick Start
— Of the following section topics, three can be used immediately to quickly
acquaint yourself with fundamental instrument operations. Use
QS1
to familiarize your-
self with front panel controls, use
QS2
to power-up the instrument, and, finally, use
QS3
to
perform exercises to operate the instrument.
•
General information
— Covers general information that includes contact infor-
mation, safety symbols and terms, inspection, and available options and accesso-
ries.
•
Model 2750 features
— Summarizes the features of Model 2750.
•
Plug-in switching modules
— Summarizes the capabilities of the Keithley
Model 77XX series switching modules.
QS1 •
Front and rear panel familiarization
— Summarizes the controls and connectors
of the instrument.
•
Rack mounting
— Covers the options available for rack mounting the Model 2750
in a standard 19-inch rack.
QS2 •
Power-up
— Covers line power connection, line voltage setting, fuse replacement,
power line frequency, and the power-up sequence.
•
Display
— Provides information about the display of the Model 2750.
•
Defaults and user setups
— Lists the *RST and factory default settings, and cov-
ers the three setup configurations available to the user.
•
Remote programming information
— Explains how SCPI commands are pre-
sented in this manual.
QS3 •
Quick start exercises
— Provides abbreviated operating information and exercises
(front panel and remote programming) to acquaint a user with operation basics.
2750-900-01.book Page 1 Wednesday, August 3, 2011 7:56 AM
Summary of Contents for 2750
