Appendix H: Using a Micromanipulator 8860 Prober
Model 4200A-SCS Parameter Analyzer Reference Manual
H-20
4200A-901-01 Rev. C / February 2017
3. Select the spline pattern. The icon of the active spline pattern is transferred to the Edit Die
Program Parameters dialog box, as shown in the following figure.
Figure 713: Edit Die Program Parameters window
4. Click
Save
on the Die Program Tools window.
5. To open an existing program listing file, click the
pcWfr Open
button on the Die Program Tools
window. Select the file and click
OK
.
Before starting testing, physically align the pins over the reference die.
