Model 4200A-SCS Parameter Analyzer Reference Manual
Section 6: Clarius
4200A-901-01 Rev. C / February 2017
6-9
Help pane
The Help pane displays information that is related to the library item or project tree item that is
selected.
If you have the Select pane open, the help describes the item that is selected in the Library.
If you have the Configure or Analyze pane open, the help describes the item that is selected in the
project tree.
Additional Clarius
+
applications
Two of the Clarius
+
applications support Clarius:
•
The
Keithley User Library Tool (KULT)
(on page 8-1) allows you to create libraries of test
modules using the C programming language. These test modules are executed by Clarius.
•
The
Keithley Configuration Utility (KCon)
(on page 7-1) manages the configuration and
interconnections between all of the test system components that are controlled by Clarius.
Another Clarius
+
software tool, the
Keithley External Control Interface (KXCI)
(on page 9-1), allows
the 4200A-SCS to be controlled remotely by an external GPIB controller.
You cannot run KXCI and Clarius simultaneously.
The Keithley Pulse tool (KPulse) controls the optional pulse cards. A pulse card is a dual-channel
pulse card that is integrated inside the 4200A-SCS mainframe.
Although KPulse can be launched at the same time as Clarius, KPulse and Clarius cannot
communicate with hardware simultaneously.
Set up a simple project
To start testing, you can start with a new project, or use an existing project. A project consists of
items such as devices and tests.
The order of operations of a test is determined by the order and selection of items in the project tree.
The following topics describe how to set up a run a simple project, using an existing project from the
Project Library.
