manualshive.com logo in svg

Keithley 4200A-SCS, Reference Manual

The Keithley 4200A-SCS offers high-performance measurement capabilities. For a hassle-free initiation, users can access the quick start manual, available for free download at 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions, allowing users to unleash the full potential of the product effortlessly.

Share
Download
background image

Model 4200A-SCS Parameter Analyzer Reference Manual 

Section 6: Clarius 

 

4200A-901-01 Rev. C / February 2017 

6-23 

 

Voltage Bias operation mode - SMU 

The Voltage Bias operation mode maintains a selected constant-voltage state at the terminal, subject 
to a user-specified current compliance of the connected SMU. 

The parameters that are available for this mode are briefly described in the following table. Select the 
links to access additional information. The parameters are listed in the order in which they appear in 
the All Parameters pane. 

Parameter 

Description 

Bias

 (on page 6-36) 

The bias is the amount of voltage to be forced. 

Force Range

 (on page 6-39) 

The SMU range that is used when forcing the voltage. 

Compliance

 (on page 3-3) 

A limit that stops the 4200A-SCS from sourcing a current that is more than 
that limit. 

Power On Delay

 (on page 6-41) 

The delay between when SMUs are powered on in a test sequence. 

Pulse Mode

 (on page 6-41) 

Pulse Mode allows you to apply voltage or current to a device for brief 
periods at widely spaced intervals. This avoids device overheating in some 
tests. Pulse Mode is only available if the source range and measure ranges 
are set to a fixed range or the Best Fixed range. 

On Time

 (on page 6-43) 

Available when Pulse Mode is selected. The amount of time that the pulse is 
on (5 ms to 20 s). 

Off Time

 (on page 6-43) 

Available when Pulse Mode is selected. The amount of time that the pulse is 
off (5 ms to 20 s). 

Base Voltage

 (on page 6-43) 

Available when Pulse Mode is selected. The voltage level that the 
instrument sources when the pulse output is off. The level that you can set 
depends on the present source range. 

Overvoltage Protection

 (on page 6-

44) 

A limit that restricts the maximum voltage level that the instrument can 
source. It is in effect when either current or voltage is sourced. 

Measure Current

 (on page 6-44) 

When this box is selected, the instrument measures current. Current is 
recorded in the Analyze sheet and shown in the graph. 

Current Column Name

 (on page 6-

44) 

The name of the current measurement. This is the name that Clarius 
displays in the Analyze spreadsheet column for that measurement. 

Current Range

 (on page 6-45) 

The measure range determines the full-scale measurement span that is 
applied to the signal. 

Low Range

 (on page 6-44) 

 

Available when the Measure Range is set to Limited Auto. This sets the 
minimum range that the instrument uses. 

Measure or Report Voltage

 (on page 

6-45) 

Determines if voltage values are recorded in the Analyze spreadsheet. 

Report Value (Report Voltage or 
Measure Voltage)

 (on page 6-46) 

Determines if programmed voltage values or actual measured voltage 
values are recorded in the Analyze spreadsheet. 

Voltage Column Name

 (on page 6-

45) 

The name of the voltage measurement. This is the name that Clarius 
displays in the Analyze spreadsheet column for that measurement. 

Report Status

 (on page 6-46) 

When this option is selected, Clarius records measurement status 
information when the test executes. A column of the Analyze spreadsheet 
displays this information. Hover over a cell to review the information.  

 

Summary of Contents for 4200A-SCS






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4200A-SCS

Oakton 700 Series Quick Manual preview
700 Series
Brand: Oakton Pages: 4
GE DigitalFlow GF868 Startup Manual preview
DigitalFlow GF868
Brand: GE Pages: 80
Igema G Installation And Operating Instructions Manual preview
G
Brand: Igema Pages: 30
z-laser ZX Series Operator'S Manual preview
ZX Series
Brand: z-laser Pages: 62
ACECO FC2002 Quick Start Manual preview
FC2002
Brand: ACECO Pages: 2
E+E Elektronik OMNIPORT 30 Operating Manual preview
OMNIPORT 30
Brand: E+E Elektronik Pages: 40
SAGEMCOM UM20 User Manual preview
UM20
Brand: SAGEMCOM Pages: 33
Kawai CA501 Midi Settings Manual preview
CA501
Brand: Kawai Pages: 8
EPE Conseil ESI 22 Quick Start Manual preview
ESI 22
Brand: EPE Conseil Pages: 3
Primes Cube L1 Operating Manual preview
Cube L1
Brand: Primes Pages: 48
Omega FPDM1000 User Manual preview
FPDM1000
Brand: Omega Pages: 20
Feature tech AW06A User Manual preview
AW06A
Brand: Feature tech Pages: 2
Trotec IC085LV Operating Manual preview
IC085LV
Brand: Trotec Pages: 3
Carman NGA6000 Notes For Users preview
NGA6000
Brand: Carman Pages: 64
INTERSPIRO Divator Pro User Manual preview
Divator Pro
Brand: INTERSPIRO Pages: 76
Net2Edge LIB-304 Installation Manual preview
LIB-304
Brand: Net2Edge Pages: 37
SPEEDMATE KNOTMETER/LOG Operating Instructions preview
KNOTMETER/LOG
Brand: SPEEDMATE Pages: 3
TFA KLIMA GUARD 30.5010 Instruction Manual preview
KLIMA GUARD 30.5010
Brand: TFA Pages: 22

Brands by name

Popular brands

Load more brands