Model 4200A-SCS Parameter Analyzer Reference Manual
Section 6: Clarius
4200A-901-01 Rev. C / February 2017
6-215
Option
Description
Foreground
The color of the text.
Background
The background color.
Transparent
Select to display the box with a transparent background. Clear to make the
background solid.
Note that selecting Transparent sets the background color selection to light gray.
Display Font
The font of the text.
Border
Changes the type of outline around the box. Width must be set to a value other
than 0 in order for the border to be displayed.
Width
The width of the display border (0 to 20).
Visible
Select to display the legend. Clear to hide the legend. The settings are
maintained when the legend is hidden.
Advanced Properties
This button opens a dialog box that allows you to change the names of the
Series in the legend. To change the names, enter the new names in the
Custom Name
column and select
Use Custom Series Names
. Note that if you
set a custom name, you cannot return to the original name.
Display test conditions
You can display the primary test conditions that were used to product the data in the graph.
The following table lists the test conditions that are displayed. For each terminal of the DUT, the Test
Conditions item displays the name, the applied operation mode, and the corresponding test
conditions.
Displayed test conditions
Operation mode
Listed test conditions
Bias
Level value
Sweep, linear mode
Start value
Stop value
Step value
Sweep, log mode
Start value
Stop value
Data Points value
List sweep
Data Points value
Step
Start value
Stop value
Step value
