Section 8: Testing flash memory
Model 4200A-SCS Pulse Card (PGU and PMU) User's Manual
8-16
4200A-PMU-900-01 Rev. A December 2020
4. Select
...
.
5. Locate the target folder.
6. Type a name for the file. The
.ksf
extension is added automatically.
7. Select
Open
.
8. Select
Export
.
Enter Segment Arb values into UTM array parameters
For tests that are based on user modules, such as the
program
,
erase
, and
fast-program-erase
tests, you need to define the Segment Arb waveforms by entering values
into arrays for the tests. These tests are based on user modules. The Segment Arb waveforms have
been partially pre-defined to reduce the number of parameters you need to enter.
The sign of the PulseVoltages array determines whether the pulse is positive (usually for a
program
pulse) or negative (usually for an
erase
pulse).
The number of parameters and number of pulse channels in the test must be the same. The period
of each pulse waveform must be the same. If you accidentally enter a value in a field, delete the
value (do not use 0).
To enter Segment Arb values:
1. In Clarius, select the project.
2. Select the test.
3. Select
Configure
.
4. Select the
Enter Values
button for each array. The Enter List Values dialog box opens.
