Model 4200A-SCS Parameter Analyzer Reference Manual
Appendix J: Using a Cascade Summit-12000 Prober
4200A-901-01 Rev. C / February 2017
J-25
Use KCon to add a prober
On the 4200A-SCS, use KCon to add the prober to the configuration:
1. Open KCon.
2. At the bottom of the Configuration Navigator, select
Add External Instrument
. The Add External
Instrument dialog box is displayed.
Figure 786: Add a prober in KCon
3. Select
Probe Station
.
4. Select
OK
. The KCon navigation displays PRBR1 in the Configuration Navigator and the
properties.
Figure 787: Use KCon to select a prober
5. Select the Cascade prober as the model.
