Model 4200A-SCS Parameter Analyzer Reference Manual
Section 6: Clarius
4200A-901-01 Rev. C / February 2017
6-17
Create a new project from My Projects
You can create a new project from the My Projects dialog box. This is the same as creating a new
empty project from the Project Library "New Project" option.
To create a new project:
1. Open
My Projects
.
2. Select
Create New
. A confirmation message is displayed.
3. Select
Yes
. The new project replaces the existing project and closes the My Projects dialog box.
4. In the project tree, select
Rename
to assign a new name to the project.
5. Press
Enter
to accept the new name.
Export a project
You can export a project. An exported project can be imported into another 4200A-SCS.
The export includes all Run History data for each test in the project.
To export a project:
1. In Clarius, select
My Projects
.
2. Select the project to be exported.
3. Select
Export
. The Export From My Projects dialog box opens.
4. Select the location for the exported file. You can right-click to select options to create a new
folder, rename an existing folder, or delete a folder.
5. Select
Export
.
Import a project
You can import a project from another 4200A-SCS.
You can import either an exported project or a project directory.
Exported projects have the extension
kzp
(on page 6-17) for instructions.
If you are importing a project directory, you import the
kpr
file from that directory. The import includes
all files from the project directory, assuming that the project directory is valid.
Make sure that the files that you are importing are not set to read-only or run-only.