Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
www.keithley.com
PA-1001 Rev. D / September 2011
9
Model 4210-MMPC-C
Multi-Measurement Prober Cable Kit
Quick Start Guide
Figure 9: Test setup for 4-pin I-V testing
C-V testing:
2-pin C-V setup
NOTE
The setup for 2-pin C-V testing requires two prober cable kits.
With a Model 4210-CVU connected to the prober bulkhead, use the fundamental setup shown in Figure 10 to
perform 2-pin C-V testing. Figure 4 shows the CVU connections to the outside of the bulkhead.
Figure 10: Test setup for 2-pin C-V testing
