Model 6220/6221 User’s Manual
Getting Started
1-7
Return to
Bottom Row
SAVE
Saves up to five instrument setups for future recall, and selects power-on
setup.
SETUP
Restores a default setup (preset or *RST) or a user saved setup.
TRIAX
Configures triax connector: Inner shield and Output Low. Can also press
CONFIG > TRIAX to configure triax connector.
AVG
Enables/disables averaging filter. Press CONFIG > AVG to configure
averaging filter.
MATH
Enables/disable math. Press CONFIG > MATH to configure math.
MENU
Accesses the main menu for calibration, self-tests, serial number, and
beeper control.
EXIT
Cancels selection, backs out of menu structure.
ENTER
Accepts selection, moves to next choice or exits menu.
3 Range keys:
and
Dual function – Selects the next higher or lower source range. When in a
menu, these keys increment or decrement values.
AUTO
Enables or disables source autorange.
4 Output control and LED status indicator:
OUTPUT ON/OFF
Turns source output on or off. For the 6221, press
CONFIG > OUTPUT to set the output response for the Model 6221.
LED indicator
Turns on when output is on. Blinks if source goes into compliance.
5 Rotary knob and CURSOR keys (Model 6221):
When in source edit, use CURSOR keys for cursor control and rotate the knob to change
a source or compliance value. The rotary knob can also be used to enable or disable the
source EDIT mode.
When in a menu, use the CURSOR keys or rotary knob for menu item cursor control.
When displaying a menu value, use the CURSOR keys for cursor control and rotate the
knob to change the value. Pressing the knob opens a menu item or selects a menu option
or value.
6 Display annunciators (not shown):
EDIT
Unit is in the source editing mode.
ERR
Questionable reading or invalid cal step.
REM
Unit in remote mode.
TALK
Unit addressed to talk.
LSTN
Unit addressed to listen.
SRQ
Service request.
FILT
Analog filter or Averaging filter is enabled.
MATH
Math is enabled.
AUTO
Auto source range selected.
ARM
Sweep or delta function armed and ready to run.
TRIG
External triggering selected.
* (asterisk)
Readings being stored in buffer.
SMPL
Blinks for every other reading acquired from the Model 2182/2182A.
Summary of Contents for 6220 DC
