Model 6220/6221 Reference Manual
Getting Started
1-17
Return to
Perform the following steps to control the beeper:
1.
Press
MENU
to display the MAIN MENU.
2.
Using the “
” keys (see
), place the cursor on
BEEPER
and press
ENTER
.
3.
Place the cursor on
DISABLE
or
ENABLE
and press
ENTER
. Beeper
enabled is the default setting.
4.
Use the
EXIT
key to back out of the menu structure.
Remote programming
– The following command controls the beeper:
Keyclick
With keyclick enabled, a “click” sound will be issued when a front panel key is
pressed. For the Model 6221, a “click” will also be issued when the rotary knob is
turned or pressed. Keyclick can only be controlled using remote operation:
Source preset
The
PRES
key can be used to set the source to a preset value. When the
PRES
key is pressed, the source will set to the preset value (“PRES” message dis-
played). When the
PRES
key is pressed again, the unit will return to the original
source value. See
for details on setting the preset
value.
Disabling the front panel
The front panel can be disabled. While disabled, display characters and annuncia-
tors are turned off. Also, all front panel controls (except LOCAL and DISP) are
locked out.
SYSTem:BEEPer:STATe <b>
‘
‘
‘
Enable or disable the beeper.
<b> = ON or OFF.
Default setting is beeper ON.
SYSTem:KCLick <b>
‘
‘
‘
Enable or disable keyclick.
<b> = ON or OFF.
Default setting is keyclick ON.
NOTE
A single decimal point will be left on at the bottom right to
indicate that the unit is powered on.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Summary of Contents for 6220
Page 16: ...Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com...
Page 24: ...Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com...
Page 453: ...Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com...
