Model 6220/6221 Reference Manual
Output Connections
2-19
Return to
Banana Jack Guard connections
When using a low-impedance voltmeter to measure voltage, it may be necessary
to make the measurement at banana jack Guard (see
). Keep in mind
that banana jack Guard should only be used if voltmeter measurements at the
DUT will result in significant loading errors. Details on “
” are
Figure 2-16
Banana Jack Guard connections
Floating current source connections
When using an external source in the test circuit, it may be necessary to float the
Model 622x off Earth Ground (see
). Details on “
WARNING
To prevent electric shock and/or damage to the Model 622x, DO
NOT exceed 250Vpk between Output Low and Earth Ground.
Above 42Vpk (30Vrms), a shock hazard exists between Output
Low and Chassis. A safety shield must surround the test circuit
and be connected to a safety Earth Ground (For details, see
“Safety shield connections,” on page 2-16
High
Low
DUT
Output
622x
V
Low-Impedance
Voltmeter
Guard
Banana Plug Cable
* Boot color for alligator clip if using supplied triax cable.
Lo
(red)*
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Summary of Contents for 6220
Page 16: ...Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com...
Page 24: ...Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com...
Page 453: ...Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com...
