9-4
Remote Operation
Model 6485 Picoammeter Instruction Manual
NOTE
See
“RS-232 interface reference,” page 9-16
for information on RS-232 settings
and connections to the computer.
Press the
or
range keys to scroll through the available RS-232 settings. To make
changes to a setting, press the
key. Then use the
or
range keys to select and modify
the value as desired. Press ENTER to save the changes and move to the next menu item
(pressing EXIT also saves the changes but leaves the menu). At the last menu item
(FLOW), ENTER will save and exit the menu.
GPIB operation and reference
GPIB bus standards
The GPIB bus is the IEEE-488 instrumentation data bus with hardware and programming
standards originally adopted by the IEEE (Institute of Electrical and Electronic Engineers)
in 1975. Model 6485 conforms to these standards:
•
IEEE-488.1-1987
•
IEEE-488.2-1992
This standard defines a syntax for sending data to and from instruments, how an instru-
ment interprets this data, what registers should exist to record the state of the instrument,
and a group of common commands.
•
SCPI 1996.0 (Standard Commands for Programmable Instruments)
This standard defines a command language protocol. It goes one step further than
IEEE-488.2-1992 and defines a standard set of commands to control every programmable
aspect of an instrument.
GPIB bus connections
To connect Model 6485 to the GPIB bus, use a cable equipped with standard IEEE-488
connectors as shown in
Summary of Contents for 6485
