DAQ6510 Data Acquisition / Multimeter System User's Manual
Section 2: Front-panel overview
DAQ6510-900-01Rev. A / April 2018
2-17
Channel menu
The Channel menus allow you to set up and control channels and scans from the front panel.
The Channel
Settings
menu allows you to select and configure channels.
The Channel
Control
menu contains options to open and close channels.
The Channel
Scan
menu contains options to set up and run scans. Options include
control of groups, which are channels that are sequential and have the same
functions applied to them.
Measure Menu
The Measure menus allow you to select, configure, and perform measure operations from the front
panel. The menu content depends upon which set of terminals is selected.
With front terminals selected:
The QuickSet menu allows you to change the function and adjust performance.
The Measure
Settings
menu contains settings for the presently selected measure
function, which is identified by the function indicator in the upper right corner of the
menu. The available settings depend on the front-panel
FUNCTION
key selection.
The
Calculations
menu contains settings that specify the way measurement
information is processed and returned.
The
Reading Buffers
menu allows you to view the list of existing reading buffers
and select one to be the active buffer. You can also create, save, delete, resize,
and clear buffers from this screen.
With rear terminals selected:
The
Reading Buffers
menu allows you to view the list of existing reading buffers
and select one to be the active buffer. You can also create, save, delete, resize,
and clear buffers from this screen.
