In this section:
Introduction .............................................................................. 9-1
Equipment required .................................................................. 9-1
Device connections .................................................................. 9-2
Integrating with a Model 3706A-S test ..................................... 9-4
Introduction
This application example demonstrates how to configure the Model DMM7510 and Model 3706A-S
System Switch to interact through TSP-Link. The application measures different types of signals on
multiple channels in multiple slots of a Model 3706A-S.
This is a common production test setup that monitors a variety of signals. These signals are typically
routed through a switch that can accommodate the performance and throughput of the test
requirement.
The example includes:
•
30 channels that measure DC voltage at two different ranges in slot 1
•
10 channels that measure AC voltage in slot 1
•
20 channels that measure 4-wire resistance in slot 4
Equipment required
This application requires the following equipment:
•
One Model DMM7510
•
One Model 3706A-S Six-Slot System Switch
•
One Model 3721 Dual 1x20 Channel Multiplexer Card and Model 3721-ST Screw Terminal Block
•
One Model 3724 Dual 1x30 FET Multiplexer Card and Model 3724-ST Screw Terminal Block
•
Multiple devices or components to be tested
•
Several insulated banana cables (such as the Model 1756 Standard Test Lead Kit that is
provided with the Model DMM7510)
•
One computer set up for communication with the Model DMM7510
Section 9
Integrating with a Model 3706A-S using TSP-Link
北京海洋兴业科技股份有限公司（证券代码：839145）
电话：010-62176775
网址：www.hyxyyq.com
