Chapter 1
2
Hardware Features
The KUSB-3116 is a high-performance, multifunction data acquisition
modules for the USB (Ver. 2.0 or Ver. 1.1) bus. The key hardware
features of the module is as follows:
• Installed in a metal BNC box to provide easy connections.
• Simultaneous operation of analog input, analog output, digital
I/O, and counter/timer subsystems.
• Analog input subsystem:
−
16-bit A/D converter.
−
Throughput rate up to 500 kSamples/s.
−
16 single-ended or 8 differential analog input channels.
−
Programmable gain of 1, 2, 4, or 8 provides input ranges of
±10, ±5, ±2.5, and ±1.25 V.
−
1024-location channel-gain list. You can cycle through the
channel-gain list using continuous scan mode or triggered
scan mode. The maximum sampling rate when using the
channel-gain list is 500 kSamples/s.
• Analog output subsystem:
−
Four 16-bit D/A converters.
−
Output rate up to 500 kSamples/s.
−
Output range of ±10 V.
−
The DACs are deglitched to prevent noise from interfering
with the output signal.
−
Output channel list. You can cycle through the output channel
list using continuous output mode or waveform mode. For
waveform generation mode, you can simultaneously update
all four DACs at 500 kS/s per channel; for continuous output
mode, you can simultaneously update all four DACs at
250 kS/s per channel.
Summary of Contents for KUSB-3116
