Overview
3
1
1
1
1
1
1
1
1
1
• Digital I/O subsystem:
−
One digital input port, consisting of 16 digital input lines. You
can program any of the first eight digital input lines to
perform interrupt-on-change operations. You can read the
value of the digital input port using the analog input
channel-gain list.
−
One digital output port, consisting of 16 digital output lines.
You can output the value of the digital output port using the
output channel list.
−
An additional dynamic digital output line that changes state
whenever an analog input channel is read.
• Five 32-bit counter/timer (C/T) channels that perform event
counting, up/down counting, frequency measurement,
edge-to-edge measurement, continuous pulse output, one-shot,
and repetitive one-shot operations. You can read the value of one
or more of the C/T channels using the analog input channel-gain
list.
• External or internal clock source.
• Trigger operations using a software command, an analog
threshold value, or an external digital input value as the trigger
event.
• 500 V galvanic isolation barrier that prevents ground loops to
maximize analog signal integrity and protect your computer.
Summary of Contents for KUSB-3116
