4-3
STP-37/FC Screw Terminal Panel
Warning:
Do not use the STP-37/FC and C-3200/C-32NN accessories or
other screw terminal panels at voltages above 30V RMS, 42.4V peak, or
60VDC. These accessories are rated for 30V RMS, 42.4V peak, or
60VDC maximum. Use at higher voltages may result in shock hazard.
Using the screw terminals on the STP-37/FC, you can easily connect your
applications to the PIO-32 Series boards with your own cables or with the
optional C-3200/C-32NN cables. Figure 4-2 shows the PIO-32 Series
board cabled to two STP-37/FC screw terminal panels. Labeled from 1
to 37, the screw terminals correspond directly to the numbers of the
pins on the C-3200/C-32NN cable 37-D connectors (not the 40-pin
ribbon header).
Figure 4-2. PIO-32 Series Board Cabled to Screw Terminal Panels
Caution:
Keithley recommends that you always use the STP-37/FC with
a case and cover. Figure 4-3 shows the mounting holes for the STP-37/FC
without the case.
STP-37/FC
Screw Terminal Panels
C-3200/C-32NN
cables
your wiring
your wiring
PIO-32 Series board
