5-1
5
Programming
You do not program the registers of your PIO-32 Series board directly
through Windows 95/98/NT. Instead, you program register changes
through the application programming interface (API) of DriverLINX.
DriverLINX is provided on the CD-ROM that comes with your board and
should now be installed on your system. (Refer to Section 3.) Using
DriverLINX, you can program the board in Visual C/C++, Visual Basic,
and Delphi.
DriverLINX features are summarized in Section 1. For detailed
information about DriverLINX in general and about programming with
DriverLINX specifically, refer to your DriverLINX documentation.
Note:
To access the DriverLINX documents on-line, Acrobat Reader
(version 3.0 or greater) must be installed on your computer.
To access the DriverLINX documentation after you have installed it on
your computer, do the following:
1. Click the Windows 95/98/NT
Start
tab.
2. In the
Start
menu, click
Programs
.
3. Find the
DriverLINX
folder, under which you should find the
On-line Manuals
entry.
4. Click on the
On-line Manuals
entry. The DriveLINX Printable
Documentation table of contents opens via Acrobat reader.
5. Scroll through the DriverLINX Printable Documentation table of
contents and find the document or document category that you want.
