C-1
C
Register Maps
Note:
Address maps are provided here only for background reference
purposes. You do not program registers directly in Windows 95/98/NT.
Instead, you program register changes through the application
programming interface (API) of DriverLINX, which is provided on the
CD-ROM that comes with your board. Refer to the DriverLINX
documentation that is installed on your system. (If it is not yet installed,
you can find it on the CD-ROM in the X:\DrvLINX4\Docs and
X:\DrvLINX4\Docs\Notes folders, where X is the drive letter of the
CD-ROM drive.)
The PIO-32 Series boards contain four 8-bit registers. To maintain
compatibility with the PIO-12 products, which use an 8255
Programmable Peripheral Interface integrated circuit, the four registers
are at base add0h, +1h, +4h, and +5h. Base add2h, +3h,
+6, and +7h are not used. Reads or writes to these locations are ignored;
the ports are not software configurable.
