Getting Started
Speci
fi
cations
For more speci
fi
cations, refer to the Speci
fi
cations and Performance Veri
fi
cation Technical Reference included on the
CD-ROM that was shipped with your instrument.
Table 4: Electrical ratings for the power connection, frequency 50/60 Hz
Model
Line Selector
Switch Setting
Voltage Range
Fuse Rating
Max Power
2220-30-1
110 V / 220 V
110: 110/115/120
220: 220/230/240
For 110 V: 6.3 A TH, 250 V
For 220 V: 3.15 A TH, 250 V
350 VA
2220J-30-1
110 V / 220 V
110: 100 V
220: 200 V
For 110 V: 6.3 A TH, 250 V
For 220 V: 3.15 A TH, 250 V
350 VA
2230-30-1
110 V / 220 V
110: 110/115/120
220: 220/230/240
For 110 V: 6.3 A TH, 250 V
For 220 V: 3.15 A TH, 250 V
450 VA
2230J-30-1
110 V / 220 V
110: 100 V
220: 200 V
For 110 V: 6.3 A TH, 250 V
For 220 V: 3.15 A TH, 250 V
450 VA
Table 5: Environmental performance for all models
Parameter
Description
Temperature
Operating: +0 °C to +40 °C
Humidity
Operating:
5% to 95% relative humidity (% RH) at up to 40 °C, non-condensing
Altitude
Operating: 100% capability up to 2,000 meters
Nominal Voltage Ratings
There are two ranges for all models, selectable by the line-voltage selector switch. Check the voltage select switch on the
bottom of the power supply before turning it on:
110 V setting, 110 / 115 / 120 VAC
220 V setting, 220 / 230 / 240 VAC
Fluctuations must not exceed 10% of the nominal rated voltage.
Float Voltage Rating
Float voltage rating: Any output can be
fl
oated up to 240 V (DC + pk AC with AC limited to a maximum of 3 V pk-pk and
maximum of 60 Hz) relative to any other output terminal. The remote sense terminals should remain within 1 V of their
respective outputs to avoid possible damage.
Series 2200 Multi-Channel Programmable DC Power Supplies User Manual
3
Summary of Contents for Series 2200
Page 2: ......
Page 4: ......
Page 10: ...Preface iv Series 2200 Multi Channel Programmable DC Power Supplies User Manual...
Page 37: ......
