3-12
Return to
2600S-900-01 Rev. C / January 2008
Section 3: Test Script Processor Interaction
Series 2600 System SourceMeter
The Series 2600 command sequence:
localnode.prompts = 0
-- Disable prompts.
data_table = {}
-- Clear table.
reset()
-- Reset Series 2600.
smua.source.output = 1
-- Turn on source output.
for i=1,10 do
-- Loop for 10 steps.
smua.source.levelv = i
-- Set source level.
mi = smua.measure.i()
-- Take a current measurement.
table.insert(data_table,mi)
-- Store measurement in table.
end
-- End of loop.
smua.source.output = 0
-- Turn off output.
print(table.concat(data_table,’,’))
-- Print table of current values.
reset()
-- Reset instrument.
Figure 3-6
LabVIEW source step example
