25
PROGRAMMING THE E30
For a description of the functions of the buttons and lights,
please read pages 2 and 3 of this manual before proceeding.
RESTORING FACTORY DEFAULTS (Purging the Settings)
Provided the E30 in unlocked, you can restore its default factory settings
at any time by pressing and holding down the
(P)
button and pressing and
then releasing the
(R)
button. Once the
(R)
button has been released,
release the
(P)
button. The screen then displays
SETTINGS CLEARED
PRESS P.
Doing this removes any settings you may have entered and
restores the E30 to its default state.
LOCKING & UNLOCKING THE E30
The E30 is supplied by the factory in an unlocked state and can be
programmed using its buttons. To prevent unauthorised personnel from
altering its settings, the programming button
(P)
can be locked.
LOCKING THE E30
To activate the lock, press and hold down the
(
˄
)
and
(
˅
)
buttons and then
press and release the
(R)
button. Continue to hold the
(
˄
)
and
(
˅
)
buttons
down until the screen displays
LOCK
. (takes about 2 seconds) release
the
(
˄
)
and
(
˅
)
buttons. The E30 is now locked. When locked, pressing
the
(P)
button will not allow access to the E30’s menu, instead a message
PROGRAM LOCKED PRESS RESET
is displayed on the screen.
UNLOCKING THE E30
To unlock the E30 repeat the above procedure, press and hold down the
(
˄
)
and
(
˅
)
buttons and then press and release the
(R)
button. Continue
to hold the
(
˄
)
and
(
˅
)
buttons down until the screen displays
UNLOCKED
.
(takes about 2 seconds) release the
(
˄
)
and
(
˅
)
buttons.
Summary of Contents for E30
Page 11: ...11 74mm 60mm 4 X 6mm Holes TOP WALL BRACKET DRILL PATTERN...
Page 19: ...19 WIRING DIAGRAMS PLUG PLAY CONNECTIONS CONNECTIONS FOR A SINGLE PHASE PUMP...
Page 20: ...20 LOW VOLTAGE AC SUPPLY WITH REMOTE INPUT CONNECT AN EXTERNAL ALARM...
Page 21: ...21 TWO SINGLE PHASE PUMPS WITH A REMOTE INPUT LOW VOLTAGE DC SUPPLY REMOTE INPUT...