Installing the K-114_Config software
First, install the K-104 / K-114 driver on your computer and then run the K-114_Config software.
(The software CD is included with purchase or can be downloaded free of charge at www.keller-druck.com)
Running the K-114_Config software
Run K-114_Config and select the appropriate COM port. Then go to the K-114 Configuration view (top right).
Tip: When the program is open, Comport is selected automatically as soon as the K-114 is plugged into the computer.
– 24 –
Voltage and current measurements with K-114_Config
No.
Symbol
Function
Description
1
I-OUT
Current supply – external consumer
No valid display during operation with external current supply
2
U-USB
USB voltage supply
3
U-OUT
Voltage supply – external consumer
Switched-in voltage supply is indicated via U-OUT
4
U-IN
Voltage input
Range: 0...12 VDC
– 25 –
