23
CLEARING BLOCKAGES
Sometimes the machine has to be cleared out when it gets blocked with material.
1. NOTE Carry out the “Safety check before machine maintenance” step!
See text above.
2. Then carry out the “Maintaining feed rollers” step.
3. Remove the material stuck in the machine and make sure the chipping disc turns freely.
SAFETY CHECK BEFORE MACHINE MAINTENANCE
•
Disconnect the PTO shaft.
•
Turn off the tractor engine.
•
Make sure all parts in the machine have come to a standstill.
•
Remove the ignition key from the tractor and put it in your pocket.
•
Engage the tractor’s hand brake and chock the wheels.
•
Lock the chipping disc.
Loosen the bolt and open the upper
chipping disc cover.
Remove jammed material.
Pull out the reset bar to open the lower cleaning hatch.
Remove jammed material.
Summary of Contents for 13-WC17H2
Page 34: ...34 Table of contents Version 1 1...
Page 36: ...36 Table of contents Version 1 1...