Kellfri 13-WC17H2, Operating Instructions Manual

6

Table of contents

SYMBOL

EXPLANATION

Z94120

Z94120

WARNING! Keep hands and feet 
away for the infeed chute and 
discharge chute on the machine to 
avoid serious injuries. Wait until the 
machine has come to a complete 
standstill before clearing the infeed 
chute/discharge chute of objects.

Z94117

Z94117

WARNING! Be careful of flying 
objects. Keep your distance from the 
discharge chute; the machine can 
eject wood chips with enough force 
to cause injury. Do not point the 
discharge chute at people, animals 
or buildings.

Z94118

Z94118

WARNING! Risk of entanglement, 
rotating power shaft. Keep hands, 
loose clothing and long hair away 
from the power shaft when it is 
rotating.

Z94241

Z94241

WARNING! When servicing 
the chipper, ensure that the PTO 
drive shaft is not rotating and is 
disconnected; otherwise there is a 
risk of serious injury or even death.

WARNING! Keep children out of the 
equipment’s working area.

WARNING! Keep off the machine.

SYMBOL

EXPLANATION

Z94119

NOTE Read and understand all 
safety and operating instructions 
concerning the machine before using 
it. Read and understand all warning 
labels. The most important safety 
aspect of the machine is that the 
user understands the machine and 
its instructions.

Z94207

Z94207

WARNING! Do not step or place any 
body parts into the infeed chute, risk 
of serious injury or even death.

Z94167

Z94167

WARNING! Hydraulic oil under high 
pressure. Do not search for leaks 
using your hands or fingers when 
the system is pressurised; there is a 
risk of serious injuries.

Z94240

540 RPM

1000 RPM

Z94240

NOTE Make sure the power shaft is 
rotating in the right direction and at 
the correct speed.

Product name:

Type:

Weight:

Year of manufacture:

Serial no.:

2006/42/EC

The equipment is CE marked.

WARNING! Rotating PTO shaft

WARNING DECALS

1. Make sure the warning decals are always clean and legible.

2. Replace warning decals that are missing or are not legible.

3. Replacement parts must have the same decals in the same location as those they replace.

4.  The product numbers on the warning decals below are used to order the correct ones for 

your machine.

5. Warning decals can be ordered from Kellfri.

Installation tips

- Ensure the area is clean and dry and that the temperature is over 10°C.

- Be sure about where to apply the warning decal before removing the protective paper.