6
OPERATING THE MACHINE
Only people who understand the safety information and instructions in this manual may oper-
ate the equipment. Be alert and careful when working with the machine and only use the tool
or product in the manner described in this manual. Avoid using the machine at temperatures
lower than -20 ° C and higher than 30 ° C.When working with equipment that has moving
parts, there is always the risk of injury. Be careful when working with equipment equipped
with hydraulic hoses ,oil under pressure can penetrate the skin. Seek medicalattention imme-
diately if this occurs. Always work alone with the tools that are defined as single porpose tools.
Respect the equipment’s risk zone.
Warning!
Never use faulty safety equipments!
•
Mix during the entire process from dry to wet.
•
Make sure that no one has hands or arms in the container when the stirring begins.
•
Make sure there is no foreign objects are in the cement and sand to be mixed.
•
Fill the container with cement.
•
Select the desired speed max 540 RPM.
•
If there should be a stop in the feed: stop the equippment, ensure that all moving parts
have stopped, open the feeder cover completely, unglogged the feeder by sticking a stick
through the feeding hole.. WARNING! Risk of crushing!
•
The removable cover is opened easily with two screws.
•
The tractor’s horsepower is recommended from 75 hp.
•
The mixer can be moved by using pallet forks or mounting it to tractor with three-point
hitch Type 2.
COUPLING AND UNCOUPLING OF IMPLEMENTS
Read the tractor’s manual before coupling. Place the cement mixer on a flat and stable surface.
Make sure it can not slide or tip over.
•
Connect the implement to the tractor’s rear three-point hitch
•
Connect the PTO-shaft, anchor the chain well
•
Ready to use
AFTER USE
Parking is not allowed with load when it is above ground . When parking with load the imple-
ment should be lowerd to the ground. Rinse the implement with water if necessary.
