7
7
OPERATING THE MACHINE
Only people who understand the safety information and instructions in this manual may oper-
ate the equipment. Be alert and careful when working with the trailer and only use the quip-
ment or product in the manner described in this manual. When working with equipment that
has moving parts, there is always the risk of injury. Always work alone with the equipment that
are defined as single purpose tools. Respect the equipment’s danger zone.
•
Secure poles or other materilas that are transported on the trailer
•
Reduce speed at work when driving on slopes and or uneven terrain.
•
Maneuvering takes place from the towing vehicles driver’s seat.
•
Maximum speed when driving is 10 km / h.
TRANSPORT AND STORING
Make sure there are no people, children and foreign objects around the area before transport-
ing the machine. Always take an extra caution during the transport. Ensure that the product
is well secured and that transport brackets are mounted. Always place the load as low as pos-
sible. Respect the danger zone even during transport. When lifting the equipment, never go
underneath suspended loads. Trailer used for transport should have working brakes.
Always store the machine in a dry place preferably underneath a cover when not in use. Ensure
that the product is stable and not likely to tip over. Never let children play where the machine
is being stored. Always keep in mind the risk of tipping!
MAINTENANCE AND SERVICE
Ensure that the unit is stable and cannot tip over during maintenance and service. Replace
damaged or worn parts immediately to reduce the risk of abrasion. Always perform mainte-
nance, service and inspection, as recommended. Use only original replacement parts or spare
parts with equivalent performance to reduce the risk of damage. All repairs and connections
with electricity must be performed by an authorized person.
Check wheel bolts regularly. Tighten if necessary.
•
Regularly check the condition of the trailer and the racks before failure is a fact. When
cracks, twisting, bending, glitches or fatigue of parts are discovered, stop the operation
and rectify the error. Worn parts shall be replaced. Disconnect the machine from the ve-
hicle when repairing faults.
•
Rinse the trailer with water if necessary.
