background image

4

Table of contents 

4

SAFETY INSTRUCTIONS

Before using the trailer, and for the safety of yourself and others, you must read the safety 

instructions and operating instructions and understand their contents. Always make the safe-

ty instructions and the operating instructions easily accessible to users of the equipment or 

product. It is a good idea to read the safety instructions from time to time, both for your own 

safety and that of others. It is important that the user understands that common sense and 

general caution are not built into the product, but must be supplied by the user.

If the operating instructions gets damaged or in any other way cannot be used, please contact 

and order a new one from: Your retailer or   download from manual.kellfri.co.uk

Do not use the equipment or product if you feel ill, tired or are under the influence of alcohol. 

Do not use the equipment or product if you are taking prescribed medication or drugs, or 

suffering from severe depression or mental illness. Always comply with general rules of the 

road and applicable rules stipulated by the Animal Welfare Act. People under the age of 15 and 

those suffering from mental illness are not allowed to use the equipment.

Kellfri disclaim any responsibility for self-made modifications, changes or alterations.

Warning! 

The original design of the product must not, under any circumstances, be modified 
without the approval of the manufacturer. Unauthorised modifications and/or accesso-
ries may cause life-threatening injuries or death to users and others.

PRODUCT SAFETY INSTRUCTIONS

Read through the tractor/ATV’s operating manual before starting work.

The product may only be use in the matter decribed in this instruction manual. 

• 

Always check that the performance of the machine and vehicle to be use guarantees 

safety and functionality. 

• 

Never overload the containers maximum loading capacity

• 

Do not drive up slopes that are too steep to drive up.

• 

The danger zone is 5-15 metres depending on the material to be spread. Only the oper-

ator is allowed to be within the danger zone whilst the spreader is in use.

• 

Under no circumstances are any person allowed to stand underneathe suspended loads.

• 

Never put your hands or feet under the machine without first stopping the machine

• 

Never leave the equipment with the ATV’s engine running. Turn off the engine and apply 

the parking brake when you leave the machine unattended, even for a short while.

• 

Always disengage the machine before performing service or maintenance work.

• 

Only the operator may be in the vicinity of the machine during all work. 

• 

Never allow anyone to ride on the ATV during work

• 

Make sure all guards are fitted and can not come loose.

• 

Fill the spreader tank directly on the field. The container of the spreader could be dam-

aged if the machine is transported with a loaded container

• 

Max imum driving speed 20km/h

• 

Only 1 person is allowed to handle the machine whilst it’s runnig, misunderstanding dur-
ing work can lead to accidents and injuries.

Summary of Contents for 33-JM40













Reviews: