Kellfri 35-GUB105, Operating Instructions Manual

6

Assembly instructions

[35-GUB015 Leaf collector]

NOTE:

 Right hand (R.H.) and Left hand (L.H.) are 

determined from the operator’s position while  

he/she is sitting on the tractor.

(Illustration 1)

 Fit the angle bracket on the collec-

tor’s cover with M8x16 hexagonal screw and lock 

nut M8. Check that the bracket is correctly turned 

as illustrated and is level with the cover, and tighten.

(Illustration 2) 

Fit right arm (R.H.) on the cover 

with bolt M6x35 and lock nut M6. Do not tighten 

yet. Do the same with the left arm (L.H.).

(Illustration 3)

 Assemble both arms together 

with two M8x65 bolts and lock nut M8. Do not 

tighten yet.

If your tractor’s tow hitch has 279 to 330 ground 

clearance, see Illustration 4. If your tractor’s tow 

hitch has 203-279 ground clearance, see Illustration 5

(

Illustration 4 or 5

) Fit the tow hitch bracket on 

the arms with two M8x50 bolts and lock nut M8. 

The mounting bolts should straddle the bolts on 

the arms. Do not tighten yet. 

1

Lock nut M8

Angle bracket

Bolt M8x16

2

Bolt M6x35

M6 Lock nut

3

Bolt M8x65

M8 Lock nut

4

Bolt M8x50

Locking pin

Attachment

Spacers

Flat bar

R-clip

Lock nut M8