8
(Illustration 9)
Fit the bar on the cover, use
bolts M6x12 and lock nuts M6
Fitting bag on the collector
1.
(Illustration 10)
Turn the middle tube
(upper part) so that the holes on the tube are
turned downwards. Insert the frame in the top
of the bag through two eyes that are sewn on
the inside.
2.
(Illustration 11)
Insert two side tubes
through the flaps on the side of the bag.
3.
(Illustration 11)
Fit the side tubes and the
frame tube together with a plastic plug.
4.
(Illustration 12)
Turn the middle tube on the
other frame tube (lower part) so that the holes
are turned upwards. Fit the side tubes and the
frame tube together with a plastic plug.
Bolt M6x12
Connection rail
M6 lock nut
9
Eyes, sewn on inside of the bag
Middle tube, (hole position downwards)
10
Plastic plug
Side tube
frame-upper part
11
Middle tube
lower part
Plastic plug
Lower part -side tube
12
Summary of Contents for 35-GUB105
Page 14: ...14...
