3
3
INTRODUCTION
Thank you for choosing a product from Kellfri AB. By following the general safety informa-
tion, instruction manual and common sense you will get many years of enjoyable use of the
product.
PRODUCT INFORMATION
Front-mounted diagonal blade with double wings and skids
• Working width 200 + 25 + 25 cm
• Working height 55 cm
• Double wings
• Replaceable wear steel
• Skids
• Hydraulic side adju15/-30°
The blade is fitted with double wings to capture the larger material volumes.
The power is distributed downwards through the skid plate, and the blade does not dig into
the ground. If there are no skids on the blade, the wear steel is subjected to unnecessary
wear. If the temperature is around zero it is difficult to work without skids.
The high blade makes the diagonal blade very suitable for dealing with large volumes of
material. In cold weather, around -20°C, there is less snow dust when the blade height is high,
which increases safety as good visibility is maintained during work.
USE OF PRODUCT
The machine is only intended for land planning, snow removal, moving of loose materials such
as manure, gravel, sand, grain, etc.
TECHNICAL DATA 37-SP250E (EURO)/37-SP250T (TRIMA)
Weight
295 kg
Operating Height
55 cm
Width
250 cm
Worjing width
200 + 25 + 25 cm
Rotatable with hydraulic
Standard-
side adju15/-30°
Skids
2 pcs
