8
8
BEFORE USE
Read the safety information and operating instructions carefully. Be sure that you understand
the safety information, operating instructions and warning labels. Use common sense when
using the machine and use appropriate personal protective equipment Always check the per-
formance and the machine combination that are use. It’s highly important these matches in
a satisfactory manner. This is to ensure the product or the function and most important yours
and others safety.
Visually inspect the equipment or product before using it. Fix or replace damaged or worn
parts immediately to reduce the risk of injury. Lubricate moving parts and check that all nuts
and bolts are tightened.
Learn and remember correct working method. Beginners should keep a low speed until the
person has learned how the machine works. The user / customer is responsible to handle the
situation correctly. Do not use the machine if it is experienced to be dangerous for the user..
Read the tractor’s manual before connecting the machine.
WARNING!
The machine’s original design must not under any circumstances be changed without the permission of the manufacturer.
Unauthorized modifications and / or accessories can result in life-threatening or fatal injury to the operator or others.
•
Make sure that all nuts, bolts and installations are securely attached. Remove all packing
/ shipping materials such as tape, steel strip, rope etc..
•
Check that the wear steel is not broken or damaged, replace if necessary.
OPERATION
Only people who understand the safety information and operating instructions to operate
this equipment or product. Be alert and cautious while working with the tool or product,
and use only the tool or product in the manner described in the manual. When working with
equipment that has moving parts, there is always the risk of injury. Be careful when working
with equipment equipped with hydraulic hoses ,oil under pressure can penetrate the skin.
Seek medical attention immediately if this occurs. Always work alone with the tools that are
defined as single purpose tools. Respect the equipment’s danger zone. Respect implement
risk zone. All maneuvers occurs from the driver’s seat.
•
Adapt the speed, slow down when driving on slopes or uneven ground.
WARNING!
Never use a tool or product with defective safety equipment.
CONNECTING/ ATTACHING THE MACHINE
•
The equipment is to be connected to the tractors front loader Euro/trima. (Read the front
loader’s instruction manual).
•
Do not forget to mount the locking pins.
•
Connect hydraulic tubes to the tractor’s hydraulic outlets.
•
Check the machine and make sure it works as it should before starting operation
•
Ready for use!
•
Warning! Be careful when connecting the diagonal blade to the tractor. Keep an eye on
the tractor’s work area during all work with the diagonal blade. During operation, pay
particular attention to the fact that the blade does not hit any barriers e.g. rocks or debris
buried in the snow, especially when turning. Before leaving the tractor cab, lower the
blade to the ground.
Warning!
Bystanders or animals that stand in the way of the projected object can be seriously
damaged. Never bystanders within the vicinity of the machine.
