9
9
AFTER USE
•
Parking is not allowed with the equipment above ground, but with the equipment rest-
ing on the ground.
•
Rinse the implement if necessary.
TRANSPORTATION AND STORAGE
Make sure there are no people, children and foreign objects around the area before transport-
ing the machine. Always take an extra caution during the transport. Ensure that the product
is well secured and that transport brackets are mounted. Always place the load as low as pos-
sible. Respect the danger zone even during transport. When lifting the equipment, never go
underneath suspended loads. Trailer used for transport should have working brakes.
Always store the machine in a dry place preferably underneath a cover when not in use. Ensure
that the product is stable and not likely to tip over. Never let children play where the machine
is being stored. Always keep in mind the risk of tipping!
MAINTENANCE AND SERVICE
Make sure that the unit is stable and not likely to tip over during service and maintenance. Re-
place damaged and worn parts immediately to reduce the risk of injury. Perform maintenance,
servicing and inspections as recommended. Use only parts with equivalent performance to
reduce the risk of damage and failure. All repairs and connections with electricity must be
performed by an authorized person. Check that all nuts and bolts are tightened after mainte-
nance and service. Always test the machine before work is started.
•
Regularly check the condition of the equipment before the failure occurs.
•
When cracks, twisting, bending, glitches or fatigue are detected, stop the work and cor-
rect the defects. Worn parts should be replaced.
•
Retighten all nuts and bolts after a few hours of driving, or after daily run.
•
Avoid using the equipment at temperatures above + 30C.
•
Disconnect the equipment from the towing vehicle when repairing errors.
•
Check that all nuts and bolts are tightened after maintenance and service. Always test the
machine before starting.
•
Lubricate moving parts regularly. For maintenance of the engine, see separate manual.
For spare parts: Contact Kellfri Service
RECYCLING
When disposing of the tool be disassembled and transported to the municipality destined
place. Contact your local authority for further information.
