background image

 

 

 

 

 

 

Safety Guide 

 

Compressor Safety Precautions: 

 

1.

 

Read and understand all instructions completely before operating this compressor.  

2.

 

Disengage power to mains and disconnect power lines to the machine prior to 

performing any work or maintenance on this unit. 

3.

 

Open tank discharge valve and relieve all pressure from tank and compressor 

lines. Do not attempt to remove any pressurized systems without first relieving 

the pressure within the unit.  

4.

 

Do not attempt to service any part while the machine is in operation.  

5.

 

Do not operate the compressor at pressures in excess of its indicated rating on the 

compressor nameplate.  

6.

 

Do not operate the compressor at speeds in excess of its indicated rating on the 

compressor nameplate.  

7.

 

Do not remove any guards, shields, or screens while the compressor is operating. 

If removed for maintenance, replace before resuming operation.  

8.

 

Observe the delivery pressure gauge daily to be sure the automatic control system 

is operating within the proper limits.  

9.

 

Periodically check all safety and relief devices for proper operation.  

10.

 

Do not play with compressed air. Pressurized air can cause serious injury or death 

to personnel.  

11.

 

Be sure that no tools, rags, or loose parts are left on the compressor or drive parts.  

12.

 

Do not use flammable solvents for cleaning parts.  

13.

 

Exercise cleanliness during maintenance when making repairs.  

a.

 

Keep dirt away from parts and exposed openings by covering with a clean 

cloth.  

14.

 

Install pressure relief valves in any isolated piping in the plant system.  

15.

 

Do not operate the compressor in areas where there is the possibility of ingesting 

flammable or toxic gases.  

16.

 

Check pipe for any signs of wear or deterioration before each use and make 

certain that all connections are secure.  

17.

 

Observe the prescribed maintenance intervals.  

18.

 

Only use genuine Kellogg parts, operating oils and operating material 

recommended by Kellogg.  

19.

 

Strictly observe the effluent disposal laws of your local authority when disposing 

of condensate.  

 

All manuals and user guides at all-guides.com

Summary of Contents for V8071-205








Reviews: